第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

Galaxy Scientific Group - 作為 Astrocafe 贊助機構及多個國內外品牌代理,為會員提供獨有優惠

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章

社長 » 2010-08-24, 22:38

funoooo 寫:社長,
不是投訴你。只叫你提一下廠家姐。
我都話只要 Function 到就 O.K.
只拍有完美主意客人,會有點麻煩呀。
現等好天測試。



全球首批第二代LVI共500個已接近售罄,外國大的代理包括Baader及Ancortes, Baader代理的導星器LVI銷售量佔了8成多,他們好像也沒有對LVI有完美的要求。

我9月初會有7公噸望遠鏡抵港,超過5公噸會馬上付運及分發給不同客戶,我代理的望遠鏡絶對不是完美的,幸好至今還沒遇上完美主義的顧客。

我提供馬灣太陽塔圓頂方案,那方案肯定不是完美,至今還要和建築師協調一些事項。新鴻基集團的產品服務水平很高,但邀請我參與計劃,很明顯是我的褔份了。

我為北京天文館及淡江大學提供的STARLAB。北京的STARLAB每年全國巡迴運作接待廿萬學生體驗,每幾年便損耗要更換一個,所以也不完美。

現在已運抵西藏阿里的4.4米Ash Dome圓頂,經過萬多里海運、數千里陸路顛簸,包裝也有少許破損,很明顯也不完美。

我為北京友人建的圓頂及APM 254 APO也不完美,人家二萬呎的房子為何不用大一點的圓頂? 弄個大一倍的503APO不成?

我自2001年至今連續10年推行優質教育基金撥款計劃,去年起獲澳門科技基金撥款興建天文台及推行高中天文選修科,也深知道相關工作並不完美。

Microsoft從沒推出完美產品,我的電腦還是用10年前出品的Window XP,至今還不斷要做Windows updates,幸好我不是完美主義者。

我認同這間意大利公司很不意大利,至少我和一眾LVI用戶拍出來的照片也絶不完美的,所以其實你有沒有更完美的導星器方案,有完美的外觀、完美的包裝又拍出完美的照片? 讓我可為請LVI借鑑一下,助他們把銷售額再推進一步。

要不然我建議你還是多關注自己銷售的”不可多得”的天文產品,完美地去照顧自己的完美主義顧客實際些,否則我看你的麻煩會大些。
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-08-26, 10:34

funoooo 寫:Guide Head 有花痕


昨天突然想到,難道是你沒有把保護貼撕走,以為導星頭花了?
附加檔案
IMG_9567.jpg
IMG_9567.jpg (75.59 KiB) 被瀏覽 26616 次
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-08-26, 11:41

再看看光。後覆!
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-08-27, 13:37

Check 了,對不起!真是保護貼花。 :oops: Guide Head 無事。
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-08-27, 15:18

funoooo 寫:Check 了,對不起!真是保護貼花。 :oops: Guide Head 無事。


無言..... :evil:
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-08-30, 21:15

查詢:

MGA 內要加入電池, 作什麼?
不是在 control panel 用煙斗插供電嗎?
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章xiaoer » 2010-08-30, 22:59

funoooo 寫:查詢:

MGA 內要加入電池, 作什麼?
不是在 control panel 用煙斗插供電嗎?

說明書話要黎推focuser就要入AA電
Meade 8", Skywatcher Equinox 80, Maxvision ED 80,A&M 80/600 APO, MT-130, LS-75F, LS-35THa, HEQ5Pro, LXD 75, P-2Z, mod 350D, mod ToUCam
xiaoer
 
文章: 66
註冊時間: 2010-02-03, 10:00

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-08-30, 23:07

xiaoer 寫:
funoooo 寫:查詢:

MGA 內要加入電池, 作什麼?
不是在 control panel 用煙斗插供電嗎?

說明書話要黎推focuser就要入AA電


Thank you!!! :D
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-08-31, 08:38

若僅作導星,不用單反控制及調焦功能,可以不用MGA,單用手控便可導星,像第一代LVI一樣,甚至用一顆9v電池便勉強可維持兩小時,但要把LCD亮度調至最暗。
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-09-03, 21:25

請問在 LVI II 內有一個 Dithering 功能, 請問有什麼用途? 看完 manual 都是不大明白. :oops:
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-09-03, 23:31

第二代LVI回來後我也沒機會用,天氣問題,也在忙些事,所以只能依書直說,就是讓你可以較有效移除相機上定點訊噪。

也可參考這個:
http://www.cloudynights.com/ubbarchive/ ... sb/5/o/all

希望下星期可以拿出來玩,但首要還是拍木星 :lol:
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章willis » 2010-09-04, 00:34

From P.20 of the manual,

With ideally perfect autoguiding, the field of view and the target will always stay
in the same position throughout all the exposures; unfortunately, so will hot
pixels. Therefore, they will be very difficult to filter out during post-processing.
That’s where the DITHERING function comes in handy. When it is activated
(ON), the telescope is shifted slightly between exposures to offset each image
slightly. This results in fixed pixel defects being misaligned in the final composite
image: thus it will be much easier for image combine methods such as median or
Sigma Clip to remove them.


This means the LVI will intentionally move a little bit after each exposure. The star images on the CCD will all move compared with the previous exposure. If a particular star image on the CCD doesn't move, it is a hot pixel. So when u stack the frames, the post-processing software can easily detect the hot pixel position & hence remove it.

***I cannot guarantee my interpretation, but it should be the case.
Tak FS60C, APM-LOMO 80/480, APM-TMB 105/650, SW Black Diamond 120ED, Borg 125SD, SW 12" Dobs , Lunt LS35T, Lunt LS80T
TMB Super Mono 4mm, Pentax XO 2.5mm, Baader Planetarium 8-24mm, Nagler (2-4mm, 3-6mm, 13mm), Ethos (3.7mm, 6mm, 10mm), Explore Scientific 100º (14mm, 20mm)
DBK 21, DMK 21, DMK 41, DMK 51, ASI 178MC
Nikon D810A, Canon 5D II, Fujifilm X-T10
頭像
willis
全域版主
 
文章: 1526
註冊時間: 2010-02-01, 17:50
來自: HK

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-09-04, 07:57

willis 寫:From P.20 of the manual,

With ideally perfect autoguiding, the field of view and the target will always stay
in the same position throughout all the exposures; unfortunately, so will hot
pixels. Therefore, they will be very difficult to filter out during post-processing.
That’s where the DITHERING function comes in handy. When it is activated
(ON), the telescope is shifted slightly between exposures to offset each image
slightly. This results in fixed pixel defects being misaligned in the final composite
image: thus it will be much easier for image combine methods such as median or
Sigma Clip to remove them.


This means the LVI will intentionally move a little bit after each exposure. The star images on the CCD will all move compared with the previous exposure. If a particular star image on the CCD doesn't move, it is a hot pixel. So when u stack the frames, the post-processing software can easily detect the hot pixel position & hence remove it.

***I cannot guarantee my interpretation, but it should be the case.


大致上是這樣,因為這亦是LVI開發人Paolo告訴我的。

想深一層,由於我們只用極軸鏡對極軸,所以在合理曝光時間如10分鐘以內是沒問題的,但到相隔二三十分鐘後,還是會看到丁點漂移的,所以若我們拍三四小時曝光的,例如24x10分鐘的,其實我們沒有看到照片拉線,但慢慢地還是有點漂移,會否因為這樣,我的照片沒有拍暗場下仍能控制訊噪在一個比較低的水平?

例如這張照片,我放大500%下看,是沒有一像素的亮點,都是有一點直徑的星像,所以應訊噪並不明顯。不過這張照片的星點尚有改善空間,因為當晚選址有誤,拍攝期間不時有大貨車在旁邊經過造成震盪,可以從LVI看到XY兩軸來回跳動得比較厲害:

viewtopic.php?f=17&t=442
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章Nebulas » 2010-09-08, 10:46

xiaoer 寫:
Nebulas 寫:很少見 xiaoer 的作品呢。
小妹的作品不見得人,無謂獻醜了。

社長 寫:全部配件現貨供應,LXD連線$120,若有需要寄給妳也可以。

我要我要,詳情PM你吧。


有时间一定来这里拍星空了。

http://www.astrocafe.hk/viewtopic.php?f=13&t=403&p=3808#p3808
以前看书学天文,后来用望远镜学习天文,现在用纸笔想象天文!
頭像
Nebulas
 
文章: 1927
註冊時間: 2010-04-08, 12:36
來自: Wuhan, Hubei Province, P.R.China

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-10-18, 15:12

社長,
請問我那一條 LX-200 Autoguide 線回來了嗎?
另外有以下問題查詢一下:
1. LX-200 在 Alt-Az mode 加 off-axis guiding 情況下可否用到 autoguiding. (Field Rotation 不用理會)
2. 如果加 Field De-rotator 情況下是否會解決到 Field Rotation 及 autoguiding 問題?
請賜教! :mrgreen:
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-10-19, 20:48

那批線我在5月時已訂了,因為LVI供不上要等一會。

1. alt-az mode不能的,因XY兩軸的修正量跟星體在視場內移動方向不斷變化,calibration已不適用
2. 我看只會更加複雜

若你未試過autoguide的,不如先用手上的EQ6 Pro等即插即用的赤道儀試試,花幾分鐘上手後,對autoguide有感覺後才玩複雜的。
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章funoooo » 2010-10-19, 23:15

社長 寫:那批線我在5月時已訂了,因為LVI供不上要等一會。

1. alt-az mode不能的,因XY兩軸的修正量跟星體在視場內移動方向不斷變化,calibration已不適用
2. 我看只會更加複雜

若你未試過autoguide的,不如先用手上的EQ6 Pro等即插即用的赤道儀試試,花幾分鐘上手後,對autoguide有感覺後才玩複雜的。


唉~~~ 我的 Neq6 現正維修, 沒有得玩. :?
funoooo
 
文章: 926
註冊時間: 2010-02-04, 11:13
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章社長 » 2010-10-19, 23:24

我現人在西藏阿里,4300米海拔,明天上5100海拔處動工組建天文台,這次也帶了EQ5 Pro及LVI,現時天氣很好,但要先休息好,否則無氣力拍。
兩個天文台 - 白鷺湖天文台、西藏自動化天文觀測站
主鏡 - Officina Stellare 500 口徑f3.8 RiFast攝星儀、APM/TMB 254 f9 APO、SkyWatcher Dob 18、305 f8.5 牛頓鏡、Paramount ME 赤道儀
配件 - 2 full sets of Supermonocentrics、Baader Mark V Binoviewer、Ethos、Canon 5D Mark II Mod、FLI Proline 16803冷凍相機、Mercedes SUV
星河科研社 http://www.astro.hk 電郵 saviofong@astro.hk
頭像
社長
Site Admin
 
文章: 12686
註冊時間: 2010-02-01, 14:17
來自: 香港

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章Lewis » 2010-10-21, 19:23

社長 寫:我現人在西藏阿里,4300米海拔,明天上5100海拔處動工組建天文台,這次也帶了EQ5 Pro及LVI,現時天氣很好,但要先休息好,否則無氣力拍。


努力,等待你的傑作.
頭像
Lewis
 
文章: 380
註冊時間: 2010-02-03, 07:52

Re: 第二代 LVI Smartguider II Imaging Control System 攝星控制系統正式發佈

文章Henry Wu » 2010-11-16, 13:35

第二代 LVI  是否可以直接接電腦, 由電腦來控制 LVI II
Henry Wu 世界旅遊攝影會 吳文欽 Taiwan 台北市
http://worldphoto168.com/
E-mail:henry.photo@msa.hinet.net
頭像
Henry Wu
 
文章: 360
註冊時間: 2010-02-12, 01:14
來自: Taiwan 台北市

上一頁下一頁

回到 星河科研社專版

誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 1 位訪客

cron