1 頁 (共 1 頁)

AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-07-23, 08:34
kitkit
Location: 大坳門
Equipment: AZ EQ5, LVI II, Canon 40D + 100-400 lens.

首次出動, 粗對極(polar scope 紅燈突然唔著), LVI II found star 可導星, 第一次開光 :D , 操作上發生小問題但可改善, 對焦調錯, 星點 out focus, 下次再試.
IMG_6175 (640x427).jpg
400mm, 5mins exposure 出現拉缐
IMG_6175 (640x427).jpg (130.77 KiB) 被瀏覽 23169 次


改2 mins exposure, ISO500
IMG_6176 (640x427).jpg
改2 mins exposure, ISO500, 對焦調錯
IMG_6176 (640x427).jpg (124.6 KiB) 被瀏覽 23169 次

2 mins exposure, ISO500, 2 hours after, 天體最後位置
IMG_6235 (640x427).jpg
2 mins exposure, ISO500, 2 hours after, 天體最後位置
IMG_6235 (640x427).jpg (127.84 KiB) 被瀏覽 23169 次

請教 5mins exposure 出現拉缐, 天體位置 拍攝中改變是甚麽問題和改善,
第一次玩, 仲有改善 :D

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-07-23, 17:42
kitkit
stacking photos: 2mins x 48, ISO 500, Canon 40D modify + 100-400 @ 400mm.

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-07-26, 21:28
willis
I used to own a modified 40D. ISO 800 is usable. With auto guiding, you can have longer exposure in each single frame. Except those bright DSOs, like M42, 3 mins is the starting point for most reasonable ISOs and focal ratios. It is preferable to have longer single exposure and less no. of frames, if time is limited. Use longer exposure time can ensure the signal received is well above the noise ground. That is higher S/N ratio. Higher S/N ratio will make life in post-processing easier.

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-07-30, 10:50
kitkit
willis 寫:I used to own a modified 40D. ISO 800 is usable. With auto guiding, you can have longer exposure in each single frame. Except those bright DSOs, like M42, 3 mins is the starting point for most reasonable ISOs and focal ratios. It is preferable to have longer single exposure and less no. of frames, if time is limited. Use longer exposure time can ensure the signal received is well above the noise ground. That is higher S/N ratio. Higher S/N ratio will make life in post-processing easier.


Thanks Willis. I did take your suggestion for 3 mins exposure last light at Clear Water Bay. But the weather was too bad. I could not see Polaris for most of the night with heavy smoke. Without Polaris, it was super challenge to align the stars. LVI II X and Y axis were running crazy, and sometime " star lost" because of the bad atmosphere. 40D view finder had a star but LCD found nothing.
IMG_6312 (800x534).jpg
Antares 3 mins A
IMG_6312 (800x534).jpg (146.28 KiB) 被瀏覽 23063 次

IMG_6310 (800x534).jpg
Antares 3 mins B
IMG_6310 (800x534).jpg (146.8 KiB) 被瀏覽 23063 次

When using LVI II, the star in the x and y offset screen was always not at the center for all the time, may I know how to correct it? First I align the object to my camera and then turned the LVI to find a guide star. But the guide star was not always in the center. I think I should do a "correct" calibration once when the sky is clear again. I did find an interesting situation, LVI control panel in last night was in "wait" for a long time after I stop guiding. I needed to turn off the power.

Do you have any suggestion for collect star alignment when Polaris is not available? :(

If you have a chance to go out for photography, I would like to join you to accelrate my learn curve. :)

Kit

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-01, 22:30
社長
若在天氣太熱或不斷有雲層掠過造成干擾,LVI II有時是失靈的。前者只要在導星狀態便沒事,拍轉目標時便要拔電源三兩分鐘再來。

所以我個人也用LVI I,簡單些。

從你的相片看,相機震動、導星鏡跟相機之間有連接的剛性問題,比極軸問題更大。

你要確定是天氣讓你找不到極星,或是自己瞄錯方位? 若是前者,用極軸鏡也找不到極星,坦白說,那種天氣下其實還是不用花時間拍了。

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-03, 21:06
kitkit
社長

23號天氣極好見到極星,但唔熟用Bathnov mask 所以衰左

29號大煙霞, 到近半夜先見到極星, 所以又試機

拉缐我諗電線冇固定,而引起拉缐, 我下次繋好電線
另外冇看到極星好何用AZ EQ 5? 有時我想樓下玩, 唔洗去咁遠😀

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-05, 06:29
社長
視乎你是在想拍攝或享受GOTO目視,拍攝的話對好極軸是基本要求,GOTO目視則可考慮AZ GOTO模式。

若拍攝很短時間,瀟洒點的做法是把極軸調至22.5度仰角、然後指北試試。對一些初上手攝星的人,隨時有其他比這個更要關注的東西,即樽頸不在這事上。

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-05, 06:42
社長
kitkit 寫:stacking photos: 2mins x 48, ISO 500, Canon 40D modify + 100-400 @ 400mm.


這張有些潛力,唯一有失焦,這個在拍攝時的確要注意一點,否則事後沒法補救。

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-07, 23:55
kitkit
社長 寫:視乎你是在想拍攝或享受GOTO目視,拍攝的話對好極軸是基本要求,GOTO目視則可考慮AZ GOTO模式。

若拍攝很短時間,瀟洒點的做法是把極軸調至22.5度仰角、然後指北試試。對一些初上手攝星的人,隨時有其他比這個更要關注的東西,即樽頸不在這事上。

咁放棄市區拍攝 目視月亮啦 :D

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-08, 00:18
kitkit
社長 寫:
kitkit 寫:stacking photos: 2mins x 48, ISO 500, Canon 40D modify + 100-400 @ 400mm.


這張有些潛力,唯一有失焦,這個在拍攝時的確要注意一點,否則事後沒法補救。


現在最困擾我是對焦,系長焦距時,我view finder可找到目標、LCD live view 就見唔到目標,變左靠view finder 的一点判定對焦與否,所以對焦失敗多

另外平埸有冇籣單方法去拍,我衣家都唔系好明点拍

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-08, 21:15
社長
有時無可避免要推至最高ISO,每次拍張5秒10秒以確認構圖及擺位,就算我遙控西藏天文台也是。

對焦也要用類似方法,但彈性大些,例如用魚骨板,對亮星人眼決定,或每次拍1-3秒對比,若是鏡頭的話,對好後用膠紙貼好以免走焦。若用短焦鏡頭的話,有時不用魚骨板直接用星點決定其實分別也不大。

平場最簡單就是對好焦後,對電腦屏幕拍,當然最理想是Sky Flat 8-)

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-09, 20:57
kitkit
社長 寫:有時無可避免要推至最高ISO,每次拍張5秒10秒以確認構圖及擺位,就算我遙控西藏天文台也是。

對焦也要用類似方法,但彈性大些,例如用魚骨板,對亮星人眼決定,或每次拍1-3秒對比,若是鏡頭的話,對好後用膠紙貼好以免走焦。若用短焦鏡頭的話,有時不用魚骨板直接用星點決定其實分別也不大。

平場最簡單就是對好焦後,對電腦屏幕拍,當然最理想是Sky Flat 8-)


從短焦距到長焦距有一個階段要克服,希望今年可以解決

平場可否理解如下:

回家用拍攝焦距對白色屏幕用光圈先決和自動對焦拍十幾張相做平埸,但拍攝要唔要一路拍一路旋轉相機?

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-11, 17:54
社長
kitkit 寫:平場可否理解如下:

回家用拍攝焦距對白色屏幕用光圈先決和自動對焦拍十幾張相做平埸,但拍攝要唔要一路拍一路旋轉相機?


拍平場時,光圈及對焦都不要動,應跟拍星時完全一樣,否則便失去平場的意義。

若拍屏幕時不排除有其他因素影響,單一張可能有些瑕疵,加上其他因素,是要拍一批然後疊加的。

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-13, 11:48
kitkit
社長 寫:
kitkit 寫:平場可否理解如下:

回家用拍攝焦距對白色屏幕用光圈先決和自動對焦拍十幾張相做平埸,但拍攝要唔要一路拍一路旋轉相機?


拍平場時,光圈及對焦都不要動,應跟拍星時完全一樣,否則便失去平場的意義。

若拍屏幕時不排除有其他因素影響,單一張可能有些瑕疵,加上其他因素,是要拍一批然後疊加的。

我了解la , 等天氣好再試, 你幾時在香港現埸指導我

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-16, 10:45
社長
現在公司已不斷增聘人手,從2月份到現在共增加了6位員工,待9月上旬最後兩位上工及工作上手後,希望入秋後我的工作會輕鬆一點,到時會有機會搞星空小聚。 :|

Re: AS ZQ5 and LVI II 首次出動

文章發表於 : 2016-08-21, 17:01
kitkit
社長 寫:現在公司已不斷增聘人手,從2月份到現在共增加了6位員工,待9月上旬最後兩位上工及工作上手後,希望入秋後我的工作會輕鬆一點,到時會有機會搞星空小聚。 :|



好的社長,快啲有活動