HEQ5 Pro + SkySafari + Skywire

HEQ5 Pro + SkySafari + Skywire
請問有沒有同好試過以上配套成功連接呢?小弟試過不成,如有同好成功連接上,可否分享經驗如何設定呢?
小弟無論iphone, ipad, ipad2都試過,接線亦顯示成功接上,serial port接上後另一端已插入到Syncscan尾端,SkySafari裡已選Skywatcher Syncscan,mount type每一款都試過,還是不行。
另官網上有以下提及,但我看得不太明白,以下所說,是可用還是不可用呢?
http://www.southernstars.com/support/faq/skywire.html
Orion/SkyWatcher - for these telescopes, the serial port is located on the bottom of the SynScan controller. There is an "EQMOD" accessory that adds a serial port to many Orion and SkyWatcher mounts. However, with the Celestron PC Port accessory, SkyWire won't work with this - the mount base speaks an entirely different protocol than the SynScan controller, which is what our app is designed to work with.
請問有沒有同好試過以上配套成功連接呢?小弟試過不成,如有同好成功連接上,可否分享經驗如何設定呢?
小弟無論iphone, ipad, ipad2都試過,接線亦顯示成功接上,serial port接上後另一端已插入到Syncscan尾端,SkySafari裡已選Skywatcher Syncscan,mount type每一款都試過,還是不行。
另官網上有以下提及,但我看得不太明白,以下所說,是可用還是不可用呢?
http://www.southernstars.com/support/faq/skywire.html
Orion/SkyWatcher - for these telescopes, the serial port is located on the bottom of the SynScan controller. There is an "EQMOD" accessory that adds a serial port to many Orion and SkyWatcher mounts. However, with the Celestron PC Port accessory, SkyWire won't work with this - the mount base speaks an entirely different protocol than the SynScan controller, which is what our app is designed to work with.